The Airvida runs on high voltage internally, so it is possible to feel electrocuted when contact the carbon fiber brush with hands or skin during operation. It’s not any harmful if happens accidentally, due to its extremely low operational current (4~6uA, 1/1000 to harmful level). Airvida is CE certificated, meets any existing safety standard of an electronic product.

Airvida runs on its own without any further supplies. However due to its effectiveness of bringing particles & dust to the ground, there might be particles accumulated onto the carbon fiber brush after time. These accumulation might affect the ion generation, so regular cleaning is suggested. Cleaning can be processed by brush cleaner in the package or using a tooth pick gently follow the brush hair to remove dust.
Please do not clean Airvida during operation; if Airvida has been cleaned by wet swabs, it should be fully dried before next operation.

We believe that no one should compromise the inevitable low frequency hums from any existing active fan design, that’s why we painstakingly design the unique emitters (carbon fiber brush) to assure that Airvida works flawlessly without an active fan. Airvida retain 2,000,000 ion/cm3 concentration within the coverage of 15cm around the carbon fiber brush.

The highest negative ion concentration in natural environment is around 20,000 ion/cm3. Airvida is capable to generate and retain the concentration of 2,000,000 ion/cm3, which is 100 times more than natural environment, to ensure that Airvida could stay effective under daily usage/condition.

Airvida proudly passes CE certification, which means Airvida meets every safety standard ranging from electromagnetic radiation, ozone etc.

Airvida is not designed water-proof, contact of any liquid should be avoided. If Airvida is accidentally wet, please power off Airvida as soon as possible and wait until Airvida is fully dried before next operation.

Airvida should be cleaned once a week or more if the region has inferior air quality.

The ozone density is fully tested by independent lab with an excellent result of only 0.006ppm (Airvida L1)/ 0.007ppm (Airvida M1 & C1); which is 8.3/ 7.1 times lower than the EU safety standard. Not only is the ozone density harmless, it’s also has a proven effect of air sterilization.

Ion does not attract dusty or airborne particles. The mechanism of ionic air purifying is to capture the airborne particles and brings them to ground. On the other hand, there are natural environments that have high density of ion, such as waterfalls or forests, and these places are famous for fresh air, not polluted air.

Airvida complies with CE certification of EU, meets the safety regulations of electronic products. However the user with a cardiac pacemaker should always consult a doctor for a permission before using any electronic devices.

Turn on Airvida L1, press “ible” logo plate with your finger while moving the emitter close to your lip. You should feel a breeze coming out from the negative ion vent (carbon fiber brush). Airvida has a fan-less design; the breeze is coming from the fully operational ion generation.

The inner wrapping of Airvida is a mixture of natural rubber / silicone without any chemical painting and is safe for human wearing.

Airvida L1 has a unique flexible bracket design to be adapted to various neckline under 34.5cm; the users of neckline larger than 34.5cm might feel the brackets.

Wearing Airvida M1 with titanium necklace is the best way to deliver negative ions. In some formal occasions, you may wear M1 with collar clip as alternative solution. However certain materials of clothes may absorb negative ions and reduce the performance.

1. Facing the carbon fiber brush to your breath way. The negative ion vent (carbon fiber brush) should not be covered by anything.
2. Remember to brush the carbon fiber brush with the cleaner in the package so as to remove pollutants on it regularly.

Airvida M1 can be used on a table standee air purifier. We suggest you putting Airvida M1 on a charging dock as charging cable is powered. To insure the best performance, it is suggested to adjust the negative ion vent toward your breath way within 30 cm.

Put Airvida M1 on charging dock, press the bottom of charging dock with your finger while moving the negative ion vent (carbon fiber brush) close to your lip. You should feel a breeze coming out from the carbon fiber brush. Airvida M1 has a fan-less design; the breeze is coming from the fully operational ion generation.

1. Press power button (right ear of Airvida C1) then the indicator light will come on.
2. Wearing Airvida C1 with its necklace. The facial side should face outwards with negative ion vent upwards.

Turn on Airvida C1, press the necklace metal rings of the both sides with your fingers while moving the negative ion vent (carbon fiber brush) close to your lip (do not touch it). You should feel a breeze coming out from the carbon fiber brush. Airvida C1 has a fan-less design; the breeze is coming from the fully operational ion generation.

Airvida C1 applies FDA (Food and Drug Administration) certified silicone case to ensure your baby’s health. The FDA is a federal agency of the United States Department of Health and Human Service. As the result, the material is certificated by this agency to validate its anti-allergy and non-toxicity.

If wanting to remove sweat stains on Airvida C1, wipe Airvida C1 or its necklace with 45% ethanol.

1. Press and hold the power button for 3 seconds. When the blue light flashes, it indicates the device is on and the air purification function is activated.
2. Hang Airvida E1 around your neck, ensuring that the carbon brush head is aligned with your face to start purifying harmful substances from the air.

Turn on Airvida E1. Lightly hold the neck strap with your hand while moving the emitter close to your lip. You should feel a breeze coming out from the negative ion vent (carbon fiber brush). Airvida E1 has a fan-less design; the breeze is coming from the fully operational ion generation.

Airvida E1 can be used on a desk or bedside table. Place Airvida E1 on its stand with the negative ion vents facing your breathing pathway, within 30 cm.

For the first Bluetooth pairing, press and hold the power button for 7 seconds until the blue light flashes rapidly. Then, use your phone to pair with the device. When the blue light turns solid, the pairing is successful.